Drill Bit Depth Stop Carbon Steel Drilling Limit Rings Depth Stop Split Rings Design Drill Bit

IRWIN 15103 HSS Step Drill Bit 9 Sizes, 1/4-3/4", Shank Type: Hex

Step Drill Bit, High Speed Steel, TiN, 1/4 in to 3/4 in Size Range, Straight with Three Flats, 3/8 in Shank Diameter, 2 1/2 in Overall Length, Maximum Drilling Depth 1/8 in ... more

Drill Stop Collar 3mm 4mm 5mm 6mm 8mm I.D. w Hex Wrench Bits Holder 6 in 1 - Black

[SIZE] - 3mm 4mm 5mm 6mm 8mm bore 8mm thickness drill stop. Hex wrench is included to help adjust and install the stop rings. [MATERIAL] - Strong and durable steel with black-oxide finished for better corrosion-resistance. ... more

Auger Drill Bit Wood Hex Shank 16mm Dia High Carbon Steel Bench Drill Carpentry - Silver

[Cutting Dia.]: 16mm/0.6 inch; [Shank Width]: 9mm/0.4 inch; [Drill Depth]: 15.7cm/6 inch; [Total Length]: 23cm/9 inch [Hex Shank]: Avoid the bit sliding off collet. [Broad Blades]: Keep the drill bit straight as it bores. ... more

Square Hole Drill Bit 5/16 Hollow Chisel Mortiser Auger Cutter Carbon Steel 2pcs - 5/16"

【SIZE】5/16" square chisel width, 52mm cutting depth, 210mm total length. 【TIP AND EDGE】The best designed Drilling Point tip and 4 Cutting Corner to enable the fast drilling and penetrating into working pieces of wood very smooth and fast. ... more

8Pcs Drill Stop Collar Set Aluminum Alloy Drill Bit Depth Stop Split Ring Drill Depth Limiter

8Pcs Drill Stop Collar Set Aluminum Alloy Drill Bit Depth Stop Split Ring Drill Depth Limiter ... more

Depth Stop Drill Bit Carbon Steel Drill Bit Depth Stop Collar Drill Depth Stop Positioning Split

Depth Stop Drill Bit Carbon Steel Drill Bit Depth Stop Collar Drill Depth Stop Positioning Split ... more

IRWIN UNIBIT 1 Step Drill Bit, 13 Hole Sizes, 1/8 in to 1/2 in, 1/32 in Step

Step Drill Bit, High Speed Steel, Black Oxide, 1/8 in to 1/2 in Size Range, Hex, 1/4 in Shank Hex Size, 3 3/16 in Overall Length, Maximum Drilling Depth 1/8 in ... more

DAYTON 1F616 Stop Collar Set

Adjustable Drill Depth Stop Collar Set, For Use With Drill Bit, Includes Seven 1 Piece Clamp Style Collars from 1/8 to 1/2 in in 1/16 in Increments with Hex Wrenches in Sturdy Plastic Box, Impact Rated No ... more

IRWIN 10231cb Cobalt Alloy Steel Step Drill Bit 13 Sizes, 1/8-1/2In

Step Drill Bit, Cobalt Alloy Steel, Black Oxide, 1/8 in to 1/2 in Size Range, Hex, 1/4 in Shank Hex Size, 3 3/16 in Overall Length, Maximum Drilling Depth 1/8 in ... more

IRWIN UNIBIT 4 Unibit #4 Step Drill Bit, 12 Hole Sizes, 3/16 to 7/8 in, 1/16 in

Step Drill Bit, High Speed Steel, Black Oxide, 3/16 in to 7/8 in Size Range, Straight with Three Flats, 3/8 in Shank Diameter, 2 7/8 in Overall Length, Maximum Drilling Depth 1/8 in ... more

IRWIN 10233 Unibit #3 Step Drill Bit, 9 Hole Sizes, 1/4 to 3/4 in, 1/16 in

Step Drill Bit, High Speed Steel, Black Oxide, 1/4 in to 3/4 in Size Range, Straight with Three Flats, 3/8 in Shank Diameter, 2 1/2 in Overall Length, Maximum Drilling Depth 1/8 in ... more

IRWIN 10233cb Step Drill Bit, 9 Hole Sizes, 1/4 in to 3/4 in, 1/16 Step

Step Drill Bit, Cobalt Alloy Steel, Black Oxide, 1/4 in to 3/4 in Size Range, Hex, 3/8 in Shank Hex Size, 3/8 in Shank Diameter, 2 1/2 in Overall Length, Maximum Drilling Depth 1/8 in ... more

CHICAGO-LATROBE 40566 135° NAS-Type Aircraft Extension Drill Chicago-Latrobe

Extra Long Drill Bit, Drill Bit Size 1/8 in, Drill Bit Point Angle 135 Degrees , Split Point, High Speed Steel, Black Oxide, 28 Degrees , Material Grade - Machining High Performance, Maximum Drilling Depth 1/2 in, Fractional Inch, 4xD ... more

WINGITS RC-WA200GT54 Apache 200 Drill Bit 1-1/4", 1PK

Glass and Tile Drill Bit, 1 1/4 in, High Speed Steel, Straight, Maximum Drilling Depth 1 1/4 in, Shank Diameter 5/16 in, Overall Length 4 3/4 in ... more

IRWIN 3041021 Wood Boring Bit,1-1/2 in. dia.,3/8 Shank

Speedbor, Hybrid Drill Bit, 1 1/2 in, 2 7/8 in Flute Length, 6 in Overall Length, Shank Diameter 3/8 in, Carbon Steel, Maximum Drilling Depth 4 in, Bright (Uncoated) ... more

MKT FASTENING 1674080 Sup-R-Split Nail Drive Anchor, 1/4" Dia., 2" L, Alloy

Hammer Drive Anchor, Anchor Diameter 1/4 in, Overall Length 2 in, Anchor Material Steel, Finish Zinc Plated, Head Type Flat, Head Height Not Applicable, Head Diameter 0.5 in, Drill Bit Size 1/4 in, Minimum Installation Depth 1 1/8 in, Ultimate Shear... ... more

IDEAL 36-312 Pilot Drill,1/4 In,3/4 Drilling Depth

Pilot Drill Bit, Pilot Bit Size 1/4 in, Pilot Bit Shank Style Flat, Pilot Bit Shank Size 1/4 in, Pilot Bit Overall Length 2 in, Pilot Bit Material Carbide, For Use On Sheet Metal, Stainless Steel ... more

WESTWARD 19N124 HSS Step Drill Bit 9 Sizes, 1/4-3/4"

Step Drill Bit, High Speed Steel, Bright (Uncoated), 1/4 in to 3/4 in Size Range, Hex, 3/8 in Shank Diameter, 2 3/4 in Overall Length, Maximum Drilling Depth 2 3/4 in ... more

DEWALT DWA1783IR 1/8" - 1/2" IMPACT READY(R) Step Drill Bit

Step Drill Bit, High Speed Steel, Titanium Nitride Coating, 1/8 in to 1/2 in Size Range, Hex, 1/4 in Shank Hex Size, 1/4 in Shank Diameter, 3 3/8 in Overall Length, Maximum Drilling Depth 1 in ... more

ZORO SELECT U30575.075.0001 Flush Embedment Anchor, 1" Dia, 3-1/8" L, Carbon

Drop-In Anchor, Anchor Diameter 1 in, Overall Length 3 1/8 in, Thread Size 3/4 In.-10, Thread Depth 1.25 in, Thread Type Coarse, Material Steel, Finish Zinc Plated, Flange Style Flush, Drill Bit Size 1 in, Minimum Hole Depth 3 1/8 in, System of... ... more

IRWIN 11105ZR HSS Step Drill Bit 5mm to 35mm

Step Drill Bit, High Speed Steel, Black Oxide, 5 mm to 35 mm Size Range, Straight with Three Flats, 3/8 in Shank Diameter, 3 in Overall Length, Maximum Drilling Depth 1/8 in ... more

MILWAUKEE TOOL 48-89-9320 4MM-20MM Step Bit

Step Drill Bit, High Speed Steel, Black Oxide, 4 mm to 20 mm Size Range, Straight with Three Flats, 3/8 in Shank Diameter, 2 9/16 in Overall Length, Maximum Drilling Depth 65 mm ... more

CLE-LINE C23733 135° Aircraft Extension Drill Cle-Line 1805 Steam Oxide HSS

Extra Long Drill Bit, Drill Bit Size 1/4 in, Drill Bit Point Angle 135 Degrees , Split Point, High Speed Steel, Black Oxide, 21 Degrees to 34 Degrees , Maximum Drilling Depth 1 in, Fractional Inch, 4xD ... more

MAG-MATE PE0475 Pad Eye,1-1/8" Depth,4-7/16" L,2-5/8" W

Pad Eye, Product Type Pad Eye, Material Carbon Steel, Finish Steel, Working Load Limit 9,500 lb, Mounting Hole Diameter 15/16 in, Ring Inner Diameter 15/16 in, Overall Width 1 1/8 in, Overall Length 4 7/16 in, Overall Depth 1 1/8 in ... more

MAG-MATE PE0200 Pad Eye,11/16" Depth,3-1/4" L,2-1/8" W

Pad Eye, Product Type Pad Eye, Material Carbon Steel, Finish Steel, Working Load Limit 4,000 lb, Mounting Hole Diameter 11/16 in, Ring Inner Diameter 11/16 in, Overall Width 11/16 in, Overall Length 3 1/4 in, Overall Depth 11/16 in ... more

CLEVELAND C13191 135° NAS 907 Type B General Purpose Aircraft Extension Drill

Extra Long Drill Bit, Drill Bit Size 19/64 in, Drill Bit Point Angle 135 Degrees , Split Point, High Speed Steel, Bright (Uncoated), 28 Degrees , Material Grade - Machining High Performance, Maximum Drilling Depth 3 1/16 in, Fractional Inch, 4xD ... more

Greenlee 625-1-1/8 Hole Cutter, 1-1/8"

Highlights: Length: 2" Blade Material: Carbide Tipped Hole Saw Diameter: 1-1/8" Application: 3/4" Conduit Minimum Chuck Size Required: 3/8" Cutting Size: 8 gauge depth Flange stop prevents over-drilling Replaceable cobalt steel pilot drill with… ... more

Greenlee 625-1-3/8 Hole Cutter, 1-3/8"

Highlights: Length: 2" Hole Saw Diameter: 1-3/8" Blade Material: Carbide Tipped Application: 1" Conduit Minimum Chuck Size Required: 3/8" Cutting Size: 8 gauge depth Flange stop prevents over-drilling Replaceable cobalt steel pilot drill with... ... more

Square Hole Drill Bit 1/4" Hollow Chisel Mortiser Auger Spur Cutter Carbon Steel

【SIZE】1/4" square chisel width, 45mm cutting depth, 160mm total length. 【TIP AND EDGE】The best designed Drilling Point tip and 4 Cutting Corner to enable the fast drilling and penetrating into working pieces of wood very smooth and fast. ... more

Drill Stop Collar 3mm 4mm 5mm 6mm I.D. Hex Wrench Carbon Steel Bit Holder 5 in 1 - Black

Features: Available in multiple pack size . For drill bits dowels cavity consistent . These collars fit around drill bits for consistent drilling depth. Ideal for dowels and cavity fixing. ... more

Drill Stop 2 Set 5mm I.D. Hex Wrench Carbon Steel Bits Holder Black

Features: Available in multiple pack size . For drill bits dowels cavity consistent . These collars fit around drill bits for consistent drilling depth. Ideal for dowels and cavity fixing. ... more

Drill Stop Collar 12mm I.D. Hex Wrench Carbon Steel Bits Holder 3 in 1 Set - Black

[SIZE] - 12mm bore 8mm thickness drill stop. Hex wrench is included to help adjust and install the stop rings. [MATERIAL] - Strong and durable steel with black-oxide finished for better corrosion-resistance. ... more

Drill Stop Collar 3mm 4mm 5mm 6mm 8mm 10mm 12mm I.D Hex Wrench Bit Holder 8 in 1 - Black

Features: Available in multiple pack size . For drill bits dowels cavity consistent . These collars fit around drill bits for consistent drilling depth. Ideal for dowels and cavity fixing. ... more

Drill Stop Collar 3mm 4mm 5mm 6mm 8mm 10mm I.D. w Hex Wrench Bit Holder 7 in 1 - Black

Features: Available in multiple pack size . For drill bits dowels cavity consistent . These collars fit around drill bits for consistent drilling depth. Ideal for dowels and cavity fixing. ... more

Drill Stop Collar 4mm I.D. Hex Wrench Carbon Steel Bits Holder 3 in 1 Set - Black

Features: Available in multiple pack size . For drill bits dowels cavity consistent . These collars fit around drill bits for consistent drilling depth. Ideal for dowels and cavity fixing. ... more

FastCap Flushmount Drill Bit System With 9/16-inch Carbide Cutter

Control the depth of your drilled holes with this FastCap bit system, which uses a ball-bearing stop collar to ensure the recess depth. With the micro-adjust screw, you can make tiny adjustments with ... ... more

Handheld Wood Doweling Jig, 6mm 8mm 10mm Drilling Dowel Guide Tool Yellow

Description: The handheld wood doweling jig has three size limit holes, which can drill 6mm, 8mm, and 10mm holes respectively with the corresponding size drill bit and drill stop. Can be used on wood boards up to 1/2-inch to 1-1/4-inch thickness. ... more