You're in Vacuum Accessories
See Matches in:
Narrow Search Results
Price Range
By Brand
- Windsor remove
By Seller
By Keyword
Best Seller | Windsor Model #53042 Ametek vacuum motor, 120 volt. This is an Ametek Vacuum Motor for your Windsor model #53042, 120 volt. It is suggested you replace the motor gasket part MTR511. Uses motor brushes part MTR507. more | go to store |
Windsor Model #53177 Ametek vacuum motor, 36 volt. This is an Ametek Vacuum Motor for your Windsor Model #53177, 36 volt. This motor has sealed bearings in it so dust and dirt will not get into the system. This allows for a longer motor life. The factory motor does not have this sealed bearing. It is... more | go to store |
Windsor Model #53772 Ametek vacuum motor, 24 volt. This is an Ametek Vacuum Motor for your Windsor Model #53772, 24 volt. This motor has a sealed bearing system which is sealed against dirt and dust from entering the bearings thus giving a longer motor service. The original factory motor does not have... more | go to store |
Windsor Compact 17 and Compact 20 Ametek Vacuum Motor #53735, 120 volt This is a factory replacement motor for your Windsor Compact 17 and Compact 20, 24 volt. DON'T RISK PREMATURE FAILURE FOR YOUR NEW MOTOR! We HIGHLY recommend the maximum protection of your motor by using our exclusive Filtered Motor Gasket, part... more | go to store |
Windsor Escort vacuum motor, 120 volt. This is a factory replacement motor for your Windsor Escort This motor has sealed bearings in it so dust and dirt will not get into the system. This allows for a longer motor life. It is suggested you replace the motor gasket part MTR512. Protect your... more | go to store |
Windsor Model #53800 and #53774 Ametek vacuum motor, 120 volt. This is an Ametek Vacuum Motor for your Windsor model #53800 and #53774, 120 volt. It is suggested you replace the motor gasket part MTR512. Uses motor brushes part MTR514. more | go to store |
Windsor Model #53130 Ametek vacuum motor, 120 volt. This is an Ametek Vacuum Motor for your Windsor Model #53130, 120 volt. This motor has sealed bearings in it so dust and dirt will not get into the system. This allows for a longer motor life. The factory motor does not have the sealed bearings. It is... more | go to store |
Ametek Extra Value Windsor #8.625-848.0 Vacuum Motor, 36 volt PLEASE NOTE, THIS MOTOR DOES NOT HAVE REPLACEABLE CARBON BRUSHES. THUS WHEN THE BRUSHES WEAR OUT, MOTOR MUST BE SCRAPPED AND REPLACED. This motor is an inexpensive version of the branded motor listed above and carries all of the same specs, mounting... more | go to store |
Windsor Genuine XP15 2 piece Brushroll #86138810 This is the Windsor Genuine XP15 2 piece Brushroll.Matches genuine Windsor part numbers: 8.613-881.0 & 86138810. more | go to store |
Windsor Genuine Brush Strip Cover #86397350 This is the Windsor Genuine Brush Strip Cover.Matches genuine Windsor part numbers: 8.639-735.0 & 86397350.Fits the following models:CVU 30/1 120 VCVU 36/1 120VCVU 46/1 120VSENSOR 2 12SENSOR 2 12 230/240VSENSOR 2 14SENSOR 2 18 230V more | go to store |
This is a factory replacement motor for the following Windsor carpet extractors: Windsor Admiral 8 Windsor Cadet 7 Windsor Clipper 12 Carpet Extractor Windsor 8.602-688.0 This motor has sealed bearings in it so dust and dirt will not get into the... more | go to store |
Windsor Model #53021 Ametek vacuum motor, 120 volt This is an Ametek Vacuum Motor for your Windsor Model #53021, 120 volt. It is suggested you replace the motor gasket Part MTR511. Uses motor brushes part MTR505. more | go to store |
Windsor #8.600-545.0, #8.600-523.0 Ametek vacuum motor, 36 volt This is an Ametek Vacuum Motor for your Windsor #8.600-545.0, #8.600-523.0, 36 volt. This motor has a 1 1/2 inch flange on the base of the motor. DON'T RISK PREMATURE FAILURE FOR YOUR NEW MOTOR! We HIGHLY recommend the maximum protection of your motor... more | go to store |
Windsor Dominator 2 Extractor vacuum motor, 120 volt. This is a factory replacement motor for your Windsor Dominator 2 Extractor. It is suggested you replace the motor gasket part MTR512. Protect your motors from dust and dirt by using a motor filter. This prolongs the life of your motor and is a must for... more | go to store |
Windsor Model #53142 and #53704 Ametek vacuum motor, 120 volt This is an Ametek Vacuum Motor for your Windsor Model #53142 and #53704, 120 volt. It is suggested you replace the motor gasket part MTR512. Protect your motors from dust and dirt by using a motor filter. This prolongs the life of your motor and is a... more | go to store |
Windsor #8.602-882.0, #8.625-857.0 Ametek vacuum motor, 120 volt. This is an Ametek Vacuum Motor for your Windsor #8.602-882.0 and #8.625-857.0, 120 volt. It is suggested you replace the motor gasket part MTR512. Uses motor brushes part MTR514. more | go to store |
Windsor #8.625-848.0 Ametek vacuum motor, 36 volt. This is an Ametek Vacuum Motor for your Windsor #8.625-848.0, 36 volt. This motor has sealed bearings in it so dust and dirt will not get into the system. This allows for a longer motor life. The factory motor does not have this sealed bearing. It is... more | go to store |
Windsor #8.600-540.0, #8.625-851.0 Ametek vacuum motor, 24 volt. This is an Ametek Vacuum Motor for your Windsor #8.600-540.0 and #8.625-851.0, 24 volt. This motor has sealed bearings in it so dust and dirt will not get into the system. This allows for a longer motor life. The factory motor does not have this sealed... more | go to store |
Windsor Sensor Upright Vacuum Brush Belt #5110 This is the Windsor Sensor Upright Vacuum Brush Belt #5110. Fits Windsor Sensor Upright Vacuum models SR12, SR15, SR18, 86005000, and 8.600.500.0. more | go to store |
Windsor Model #86005460 & WIN8.600-546.0 Ametek Vacuum Motor, 24 volt This is a New Windsor Model #86005460 & WIN8.600-546.0 Ametek Vacuum Motor, 24 volt.This motor has a 1 1/2 inch tube on the base of the motor.We HIGHLY recommend the maximum protection of your motor by using our exclusive Filtered Motor Gasket, part... more | go to store |
Windsor #8.602-676.0 Ametek vacuum motor, 120 volt This is an Ametek Vacuum Motor for your Windsor #8.602-676.0, 120 volt. It is suggested you replace the motor gasket part MTR512. Protect your motors from dust and dirt by using a motor filter. This prolongs the life of your motor and is a must for all... more | go to store |
Windsor #8.602-677.0, #8.625-843.0 Ametek vacuum motor, 120 volt This is an Ametek Vacuum Motor for your Windsor #8.602-677.0, #8.625-843.0, 120 volt. This motor has a 1 1/2 inch tube on the base of the motor. It is suggested you replace the motor gasket part MTR512. Protect your motors from dust and dirt by using a... more | go to store |
Windsor Sensor SR12 Upright Vacuum Brushroll #5010WI This is the Brushroll #5010WI for the Genuine Windsor Sensor SR12. Fits Windsor Sensor SR12 Upright Vacuum models ONLY. This Windsor Sensor Brushroll features a Dual Brush design. Also, fits SEBO Upright models X1, XP1, X4, G1, DART1, and FELIX1. more | go to store |
Windsor #Admiral, Commodore vacuum motor, 120 volt. This is a factory replacement motor for your Windsor #Admiral, Commodore This motor has a 1 1/2 inch tube on the base of the motor. It is suggested you replace the motor gasket part MTR512. Protect your motors from dust and dirt by using a motor... more | go to store |
Windsor Model #53755 and #53198 Ametek vacuum motor, 24 volt This is an Ametek Vacuum Motor for your Windsor Model #53755 and Windsor Model #53198, 24 volt. DON'T RISK PREMATURE FAILURE FOR YOUR NEW MOTOR! We HIGHLY recommend the maximum protection of your motor by using our exclusive Filtered Motor Gasket, part... more | go to store |
Windsor Model #53707, #53134 and #86026770 Ametek vacuum motor, 120 volt This is an Ametek Vacuum Motor for your Windsor Model #53707, #53134 and #86026770, 120 volt This motor has a 1 1/2 inch tube on the base of the motor. It is suggested you replace the motor gasket part MTR512. Uses motor brush part MTR515. more | go to store |
Windsor Versamatic Upright Vacuum 18" Brush Strips ONLY #4028 This is the Genuine Windsor Versamatic Upright Vacuum Brush Strips #4028. Fits ALL 18Windsor Versamatic Upright Vacuum Brushrolls. Use ONLY genuine Windsor parts to get maximum performance and maintain your vacuums warranty! more | go to store |
Windsor Versamatic Upright Vacuum 14" Brush Strip ONLY #2046 This is the Genuine Windsor Versamatic Upright Vacuum 14" Brush Strip ONLY #2046. This is one brush roll strip ONLY! Fits ALL 14” Versamatic AND Versamatic Plus Upright Vacuum models. Will also fit Sebo 370 commercial upright vacuums. Use ONLY genuine... more | go to store |
Windsor Model #53789 and #86026880 Ametek Vacuum Motor, 120 volt This is a factory replacement motor for your Windsor #53789 and #86026880, 120 volt. DON'T RISK PREMATURE FAILURE FOR YOUR NEW MOTOR! We HIGHLY recommend the maximum protection of your motor by using our exclusive Filtered Motor Gasket, part MTR1500.... more | go to store |
Windsor Sensor 12 Inch Brush Roll #8.600-495.0 This is the Genuine Windsor Sensor 12 Inch Brushroll. Genuine part #8.600-495.0.Specifications:Machine Application: Axcess 12, Sensor S12 (120V), Sensor SRS12 (120V), Sensor XP12 (120V), Sensor SRXP12 (120V)Bristle Row Configuration: 2 S.R.Sweep Path:... more | go to store |
Windsor Versamatic and Versamatic Plus 14 inch Brush Strip #8.600.244-0 This is the Genuine Windsor Versamatic and Versamatic Plus 14 inch Brush Strip. Genuine part #86002440. Specifications: 14 inch brush strip Machine Application: Fits all Versamatic and Versamatic Plus and Sebo 370 commercial upright vacuums. Also fits... more | go to store |
Ametek Extra Value Windsor Model #53177 Vacuum Motor, 36 volt PLEASE NOTE, THIS MOTOR DOES NOT HAVE REPLACEABLE CARBON BRUSHES. THUS WHEN THE BRUSHES WEAR OUT, MOTOR MUST BE SCRAPPED AND REPLACED. This motor is an inexpensive version of the branded motor listed above and carries all of the same specs, mounting... more | go to store |
Ametek Extra Value Windsor Model #53772 Vacuum Motor, 24 volt PLEASE NOTE, THIS MOTOR DOES NOT HAVE REPLACEABLE CARBON BRUSHES. THUS WHEN THE BRUSHES WEAR OUT, MOTOR MUST BE SCRAPPED AND REPLACED. This motor is an inexpensive version of the branded motor listed above and carries all of the same specs, mounting... more | go to store |
Windsor Genuine Sensor and Versamatic Carbon Brush#86139400 This is the Windsor Genuine Sensor and Versamatic Carbon Brush.Matches genuine Windsor part numbers: 8.613-940.0 & 86139400.Comes as a 2 pack. more | go to store |
Windsor Genuine Geared Brushroll Motor, 115 Volt #86352850 This is the Windsor Genuine Geared Brushroll Motor, 115 Volt.Matches genuine Windsor part numbers: 8.635-285.0 & 86352850. more | go to store |
Windsor Genuine Brush Bearing Kit #86028010 This is the Windsor Genuine Brush Bearing Kit.Matches genuine Windsor part numbers: 8.602-801.0 & 86028010. more | go to store |
Windsor Genuine Sensor XP12, XP15, and XP18 Brushroll Release #86138650 This is the Windsor Genuine Sensor XP12, XP15, and XP18 Brushroll Release.Matches genuine Windsor part numbers: 8.613-865.0 & 86138650. more | go to store |
Windsor Genuine XP15 and XP18 Brush Cover Release #86138690 This is the Windsor Genuine XP15 and XP18 Brush Cover Release.Matches genuine Windsor part numbers: 8.613-869.0 & 86138690. more | go to store |
Ads related to Vacuum Accessories